specification pd-25a pd-25b PD-2505 pd-2512 pd-2515 model dc voltage rated current current range rated power output line regulation load regulation setup, rise time hold time (typ.) voltage range frequency range efficiency(typ.) input inrush current (typ.) leakage current safety standards working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over load over voltage ac current (typ.) 5v 5v 5v 12v 15v 2.1a 1.2a 2.5a 1a 0.8a 0.2 ~ 2.5a 0.2 ~ 2a 0.1 ~ 3a 0.1 ~ 1.2a 0.1 ~ 1a 25w 25.2w 25w 24w 24w 50mvp-p 50mvp-p 50mvp-p 50mvp-p 50mvp-p 2.0% 2.0% 4.0% 4.0% 4.0% 4.0% 6.0% 6.0% 6.0% 6.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 3.0% 3.0% 3.0% 3.0% 4.0% 4.0% 4.0% 4.0% 250ms, 50ms/230vac 250ms, 30ms/115vac at full load 100ms/230vac 16ms/115vac at full load 85 ~ 264vac 120 ~ 370vdc 47 ~ 63hz 71% 77% 73% 74% 75% 0.65a/115vac 0.4a/230vac cold start 32a <0.5ma / 240vac above 105% rated output power 5.75 ~ 6.75v 13.8 ~ 16.2v 5.75 ~ 6.75v 27.6 ~ 32.4v 5.75 ~ 6.75v 13.8 ~ 16.2v -5.75 ~ -6.75v -13.8 ~ -16.2v 17.3 ~ 20.3v -17.3 ~ -20.3v protection type : hiccup mode, recovers automatically after fault co ndition is removed protection type : shut down o/p voltage, re-power on to recover protection type : shut down o/p voltage, recovers automatically after t emperature goes down ul60950-1, tuv en60950-1 approved -10 ~ +60 (refer to output load derating curve) 20 ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03%/ (0 ~ 50 ) on ch1 output 10 ~ 500hz, 2g 10min./1cycle, period for 60min.each along x, y, z axes 507.9khrs min. mil-hdbk-217f (25 ) 107*61*28mm (l*w*h) 0.15kg; 96pcs/15.9kg/1.3cuft file name:pd-25-spec 2005-10-03 1.2a 0.8a 2.5a 1a 0.8a 0.1 ~ 1.5a 0.1 ~ 1a 0.1 ~ 2.5a 0.1 ~ 1.2a 0.1 ~ 1a 150mvp-p 200mvp-p 50mvp-p 50mvp-p 50mvp-p 12v ch2 ch2 ch2 ch2 ch2 24v -5v -12v -15v over temperature harmonic current ems immunity compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en61000-4-2,3,4,5, light industry level, criteria a 25w dual output switching power supply p d - 2 5 s e r i e s features : ripple & noise (max.) note.2 voltage tolerance note.3 emi conduction & radiation environment safety & emc (note 4) protection withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. tj 135 typically (u1) detect on main control ic universal ac input / full range low leakage current<0.5ma protections:short circuit/over load/over voltage/over tempe rature cooling by free air convection 100% full load burn-in test fixed switching frequency at 100khz low cost high reliability 2 years warranty ch1 ch1 ch1 ch1 ch1 output number
+12v +12v +5v +5v file name:pd-25-spec 2005-10-03 unit:mm ambient temperature ( ) load (%) (horizontal) (vertical) mechanical specification output derating -10 -10 00 10 20 30 40 50 45 60 55 20 40 60 80 100 dc output connector (cn2) : molex 41791-04 or equivalent pin no. 1 2,3 4 assignment v1 com v2 mating housing molex 2139 or equivalent terminal molex 2478 or equivalent ac input connector (cn1) : molex 41791-03 or equivalent pin no. 12 3 assignment ac/l no pin ac/n mating housing molex 2139 molex 2478 or equivalent or equivalent terminal pwm circuit detection emi filter rectifiers & filter power switch- filter & rectifiers +v com i/p fg ing control output voltage (v) 200 80 4.0 60 4.2 4.4 4.6 4.8 140 100 120 180 160 5.0 5.2 260 240 220 50 100 150 200 250 300 350 ta=25 output ripple (mvp-p) mounting holes 4-3.5 dia to chassis grounding 6.35 94 107 cn1 ac fuse 2.5a/250v cn2 12 3 4 3 2 1 61 53 3.81 28 block diagram fosc : 100khz static characteristics (a) 25w dual output switching power supply p d - 2 5 s e r i e s
5v ch1 specification pd-65a model dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range frequency range efficiency(typ.) input inrush current (typ.) leakage current working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload ac current (typ.) 5v 12v ch2 5.5a 2.8a 0.4 ~ 7a 0.2 ~ 3.2a 61.1w rated output power for convection; 72w with 18cfm min. forced air 50mvp-p 120mvp-p ch1:4.75 ~ 5.5v 4.0% 7.0% 1.0% 2.0% 3.0% 4.0% 800ms, 20ms at full load 60ms at full load 90 ~ 264vac 127 ~370vdc 47 ~ 440hz 78% 1.5a/115vac 0.9a/230vac cold start 20a/115vac 40a/230vac <0.75ma 73 ~ 105w rated output power protection type : hiccup mode, recovers automatically after fault co ndition is removed. protection type : hiccup mode, recovers automatically after fault co ndition is removed. -10 ~ +60 (refer to output load derating curve) 20 ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.04%/ (0 ~ 50 ) on +5v output 10 ~ 500hz, 2g 10min./1cycle, period for 60min.each along x, y, z axes 288.1k hrs min. mil-hdbk-217f (25 ) 127*76*42mm (l*w*h) 0.24kg; 54pcs/15kg/1.35cuft file name:pd-65-spec 2007-03-14 ch1: 5.75 ~ 6.75vdc on ch1 over voltage safety standards harmonic current ems immunity compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en55024, light industry level, criteria a en61000-4-2,3,4,5,6,8,11; env50204, features : p d - 6 5 s e r i e s environment safety & emc (note 4) protection emi conduction & radiation withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc ripple & noise (max.) note.2 voltage tolerance note.3 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 5. mounting holes m1 and m2 should be grounded for emi purposes. universal ac input / full range low leakage current<0.5ma protections: short circuit / overload / over voltage cooling by free air convection 100% full load burn-in test fixed switching frequency at 65khz 2 years warranty output power (max.) ul60950-1, tuv en60950-1 approved ch1 output number pd-65b 24v ch2 3.5a 2a 0.4 ~ 6a 0.2 ~ 2.6a 65.5w 150mvp-p 50mvp-p ch1:4.75 ~ 5.5v 7.0% 4.0% 2.0% 1.0% 4.0% 3.0% 81% 65w dual output switching power supply
file name:pd-65-spec 2007-03-14 unit:mm fosc : 65khz dc output connector (cn2) : molex 5273-06 or equivalent pin no. 1 2,3 4,5 6 assignment +v +5v com nc mating housing molex 5195 or equivalent terminal molex 5194 or equivalent ac input connector (cn1) : molex 5277-02 or equivalent pin no. 12 assignment mating housing molex 5195 molex 5194 or equivalent or equivalent terminal load (%) block diagram mechanical specification ambient temperature ( ) (horizontal) -10 0 10 20 30 40 50 60 20 40 60 80 100 o.v.p. control ing com +5v rectifiers & filter switch- power filter & rectifiers o.l.p. detection circuit pwm filter & rectifiers +v fg i/p filter emi 65w dual output switching power supply svr1 115.8 5.6 76 64.8 42 127 fg 4 6 5 2 3 cn2 4- 3.8 1 5.6 m1 m2 2 1 cn1 ac fuse f4a/250v 90 100 110 135 155 264 230 100 90 80 70 60 50 40 input voltage (v) 60hz load(%) output derating vs input voltage derating curve ac/n ac/l p d - 6 5 s e r i e s
|
